about Autohex II Download forum contact

Mercedes Benz 203 Driver SAM Control Unit

Locations
Locations
top view
top view
bottom view
bottom view
Location
The front SAM control unit with fuse and relay module (N10/1) is located in the left-hand control unit box in the engine compartment.
Control
· Master control unit for the exterior lights function except the turn signal functions
Model 203
Model 209.3/4
· Wiper system (WSA)
Model 203.0/2/7 up to 23.4.04
Model 203.0/2/7 as of 24.4.04
Model 209.3/4
· Headlamp cleaning system (HCS [SRA])
Model 203.0/2/7
Model 209.3/4
· Fanfare horns
Model 203
Model 209
Switching of consumers
• Left front lamp unit (complete)
• Right front lamp unit (complete)
• Left front fog lamp
• Right front fog lamp
• Left side marker I
• Right side marker I
• Left and right center air outlet illumination (with code 581)
• Front cigarette lighter with ashtray illumination (with code 301)
• Glove compartment lamp with switch
• Armrest stowage compartment illumination
• Washer pump
• Rear washer pump (203.2)
• Washer nozzle heater and washer nozzle hose heater (with code 875)
• Headlamp washer pump (with code 600)
• AAC [KLA] AC compressor control valve (with code 580 or 581)
• Coolant circulation pump
Scanning of switches, pickups and sensors
• Brake fluid indicator switch
• Windshield washer fluid level indicator switch
• Coolant level indicator switch
• Outside temperature indicator temperature sensor
• Parking brake indicator switch
• Refrigerant pressure/refrigerant temperature sensor (up to modification year 2004 with code 580 or 581)
• Refrigerant pressure sensor (as of modification year 2004 with code 580 or 581)
• Backup lamp switch (with manual transmission)
• Rotary light switch including outside mirror adjustment
Switching the following relays
• Wiper on/off relay
• Wiper stage 1/stage 2 relay
• Fanfare horn relay
• Secondary air injection pump relay
• Circuit 87 relay (engine)
• Circuit 87 relay (suspension control unit)
Voltage supply for the following control units
• Circuit 30: ME-SFI [ME] control unit or CDI control unit (in model 203 plug 2)
• Circuit 30: ESP and BAS control unit (plug 7)
• Circuit 30: Automated manual transmission control unit (plug 9)
• Circuit 30: Radio or radio and navigation unit or COMAND operating, display and control unit (plug 11)
• Circuit 30: Steering angle sensor (in model 203 up to 05.02 plug 19)
Circuit 30: Steering column module (in model 203 as of 06.02 plug 19)
Circuit 30: Steering column module (in model 209 plug 19)
Circuit 30: EIS [EZS] control unit (plug 19)
• Circuit 15R: Restraint systems control unit (plug 12)
• Circuit 15R: EIS [EZS] control unit (plug 19)
• Circuit 15R: Telephone transmitter/receiver and TELE AID D2B or telephone transmitter/receiver, D2B fixed installation telephone (plug 23)
• Circuit 15: ME-SFI [ME] control unit or CDI control unit (plug 2)
• Circuit 15: Brake booster vacuum pump control unit (in model 203 plug 3)
• Circuit 15: Restraint systems control unit (plug 12)
• Circuit 15: Rear SAM control unit with fuse and relay module (plug 13)
• Circuit 15: Glow output stage (in model 203 plug 14)
• Circuit 15: EIS [EZS] control unit (plug 19)
• Circuit 15: Instrument cluster (plug 19) with additional comfort automatic air conditioning
Circuit 15: With C-AAC [K-KLA], C-AAC [K-KLA] multifunction sensor and C-AAC [K-KLA] sun sensor (4 in total) (plug 19)
• Circuit 15: Speed-sensitive power steering control unit (in model 203 plug 24)
CAN connections
• CAN link between front SAM control unit (N10/1) and CAN-B voltage distributor (plug 10)
• CAN link between front SAM control unit (N10/1) and cockpit CAN-B voltage distributor (plug 20)
CAN signals
The front SAM control unit with fuse and relay module (N10/1) is a device on the CAN-B in the overall network.
Connector assignment (top view) of front SAM control unit with fuse and relay module (N10/1)
Connector assignment (bottom view) of front SAM control unit with fuse and relay module (N10/1)


AutoHex (Auto Diagnostic scanner) is one of the best Professional scan tools to for Mercedes Benz; Autohex Scanner can test Mercedes Benz Systems effectively and easily, with many powerful features to help you in diagnosing and testing. For more information:
Mercedes Benz Scan Tool

Programming BMW F Series
Description
In this section we have some useful information about some Mercedes Benz 203 Driver SAM System and it features.
Autohex II Reviews
Autohex II Reviews
Find out Autohex II user's impressions about using this tool for BMW advanced services
AutoHex II
AutoHex II
AutoHex II is your best choice to have full access to dealer functions like coding, adjusting and modules flashing/programming, Contact us for prices
AutoHex Forum
Scan Tool Forum
Join AutoHex Onboard Diagnostic Forum to share useful information about using onboard diagnostic functions and other tips
Car Technical Information
Car Technical Information
Our Technical information has rich, deep, and very useful infromation and programs.You can find basics, also you can find very specific information
Diagnosis and Coding
Diagnosis Special Functions
AutoHex Auto Diagnostic Scanner provides rich functions for coding and adaptation, to learn more visit this section