OBD II Fault Code P1F96 :

Description of Fault code P1F96

Anode Sweep Valve Failure (Open)

Possible failuer P1F96

• Purge Air Inlet Solenoid Valve remained open
• Harness between Purge Air Inlet Solenoid Valve and FCCM
• Purge Air Outlet Solenoid Valve remained open
• Harness between Purge Air Outlet Solenoid Valve and FCCM
• Fuel Purge Solenoid Valve remained open
• Harness between Fuel Purge Solenoid Valve and FCVSCM
• Drain Valve remained open
• Harness between Drain Valve and FCCM
• Leak from the Fuel Cell Stack
• FCVSCM failure
• FCCM failure
• Leak from Anode Circulation Pipe

Diagnostic Procedure using AutoHex II Scan Tool

• The rear average wheel speed > 15km/h and vehicle speed on the meter<1km/h
• If the rear average wheel speed > 15km/h and VSP<1km/h lasts for 0.3 seconds, the malfunction is determined.

Test Conditions using AutoHex tester

• Vehicle speed / wheel speed is normal
• Brake is out of action
• The automatic brake is out of action

Clear Fault codes Conditions

• The rear average wheel speed > 15km/h and vehicle speed on the meter<1km/h
• If the rear average wheel speed > 15km/h and VSP<1km/h lasts for 0.3 seconds, the malfunction is determined.

MIL Status

• Glow ON

Note:

• AutoHex II is a professional Auto diagnostic.
• This fault code is a GERENRIC fault code, some cars may change the meaning of this fault code.
  To get the accurate fault code description you may use AutoHex II

More Fault codes: