OBD II Fault Code P1F33 :

Description of Fault code P1F33

Pre-charge Failed

Possible failuer P1F33

• BM Switch OFF (Wrong Operation)
• BM Contactor failure
• FCVSCM failure
• DC-DC Converter failure
• ACCMPI Module failure
• APMPI Module failure
• DMPI Module failure
• BVCM failure
• Open-circuit of cable connecting BM Contactor and BVCM (+,-)
• Open-circuit of cable connecting BMCM and Bypass Contactor
• Open-circuit of Power Line between IGP1B RLY and FCVSCM
• Open-circuit of cable connecting FCVSCM and High Voltage Contactor (+)

Diagnostic Procedure using AutoHex II Scan Tool

• The rear average wheel speed > 15km/h and vehicle speed on the meter<1km/h
• If the rear average wheel speed > 15km/h and VSP<1km/h lasts for 0.3 seconds, the malfunction is determined.

Test Conditions using AutoHex tester

• Vehicle speed / wheel speed is normal
• Brake is out of action
• The automatic brake is out of action

Clear Fault codes Conditions

• The rear average wheel speed > 15km/h and vehicle speed on the meter<1km/h
• If the rear average wheel speed > 15km/h and VSP<1km/h lasts for 0.3 seconds, the malfunction is determined.

MIL Status

• Glow ON

Note:

• AutoHex II is a professional Auto diagnostic.
• This fault code is a GERENRIC fault code, some cars may change the meaning of this fault code.
  To get the accurate fault code description you may use AutoHex II

More Fault codes: